The Fluke Networks® FiberInspector&153; Pro Video Microscope inspects fiber connections quickly and safely. Look at installed fiber in a new light with the FT600. This portable, dual-magnification video microscope gives you superior vision by enabling you to inspect all types of fiber installations in switches, routers, interface cards, patch panels, wall outlets and patch cables. It saves time by eliminating the need to access the backside of patch panels or disassemble hardware devices prior to inspection. Instead of removing each fiber, you just insert the video probe to inspect the fiber while it's still in place. This is the only practical way to inspect many hardware devices where disassembly is not a realistic option. FiberInspector Pro never touches a termination so the risk of contamination and damage are eliminated. With an integrated dual-magnification camera, you don't have to waste time changing between different mono-magnification cameras or other test tools.
Dirt, dust and other contaminants are the enemy of high-speed data transmission over optical fiber. With today's network applications requiring more bandwidth and loss budgets being tighter than ever before, all optical connections must be clean and free of contaminants to ensure network operation. With dual magnification, the FT600 is the ultimate tool for inspecting multimode and singlemode applications in one easy-to-use tool. FiberInspector Pro includes a handheld LCD unit and a small, lightweight probe that contains a long-life LED light source and CCD video camera. The probe adapter tip mates with the connector and projects crisp, clear images of microscopic debris and end-face damage on the LCD. This video display allows you to look at the fiber end-face without looking into the fiber, eliminating the chance of harmful laser light reaching your eye.
This easy-to-use instrument provides the latest in fiber inspection technology. The FiberInspector Pro evaluates both multimode and singlemode fiber connectors and interfaces with its integrated dual-magnification camera. It provides clear end-face images with its large display. Easily inspect fiber connectors already installed on patch panels. Quickly determine whether fiber connectors on a hardware device are clean and in good condition -- without disassembling the device. The FT600 eliminates the hazards of eye damage while inspecting live fiber. Use FiberInspector for troubleshooting. Fiber hardware devices feature connectors at the front or back. that are very difficult to check since they're mounted inside the device's enclosure. If a contaminated jumper is inserted, the termination inside the device becomes contaminated and contributes to signal loss. FiberInspector Pro never touches the termination, reducing the risk of contamination.
Model FT600 works 10 times faster than traditional scopes. The integrated dual-magnification camera allows you to change the magnification between 250X and 400X quickly in a single camera probe without changing cameras or test tools. Simply insert the probe and inspect installed fiber connectors through the bulkhead adapters without accessing the backside of the patch panels. The 3.5" TFT, active matrix fiber display has 320 x 240 pixels. This microscope is compatible with standard ST, SC and FC connectors as well as other connector types including small form factor connectors with optional adapter tips. Its rugged design endures tough working conditions. It withstands the drops and other mishaps that occur in today's network installation environments. The hard carrying case protects your equipment when not in use, so it's ready to go when you are.
Includes FT650 fiber probe, FT650 fiber display, probe adapter tips (ST, SC, FC and universal 2.5-mm patch cord) and ac adapter/battery charger in a hard carrying case. The 12.8-ounce display measures 4.3" x 9.1"