Cable Prep SCT-540QR Stripping and Coring Tool, .540" QR

SCT-QR stripping/coring tools strip back and bevel the outer conductor, core the dielectric, and strip back the outer jacket on CommScope Quantum Reach (QR) cables.

Note: Because the jacket must be stripped after coring, SCT tools for QR applications include a special, integrated jacket stripper made for this purpose.

THE SCT-QR ADVANTAGE:

• Perform three functions at once
• Perfectly aligned coring & stripping blades
• Prevent O-ring damage
• Operate manually or with a drill
• Available with plastic or aluminum body

APPLICATIONS:

SCT-QR stripping/coring tools work on 0.320" through 1.125" CommScope Quantum Reach (QR) cables.

SPECIAL FEATURES:

• Three Functions in One Operation:

  SCT-QR tools speed connectorization because they strip back and bevel the outer conductor and core the dielectric in one smooth operation.

• Non-Clogging Stops:

  There is a non-clogging internal stop on every SCT-QR tool that is factory-set to the required dimension for the cable.

• Patented Stripping and Coring Blades:

  The bevel on the coring edge of the blade self-aligns on the center conductor, which enables an SCT-QR tool to core cable even when it is out-of-round. Made of tool steel that is heat treated to full hardness, the blade bevels the outer conductor, thereby eliminating O-ring damage and minimizing water migration.

• Perfectly Aligned Cutting Edges:

  The patented one-piece blade guarantees proper alignment of the two cutting edges.
  Manufactured from high-alloy tool steel that is heat treated to full hardness, the beveled edges remain sharp over a long life.

• Precision Performance:

  SCT tools core the dielectric and strip the aluminum sheath without scoring.
  The blade leaves a beveled outer conductor edge that eliminates O-ring damage, thereby minimizing water migration.

• Manual or Drill Operation:

  SCT tools can be ordered with a standard ergonomic handle or a Cable Prep brand RTH ratchet T-handle.
  Either handle can be removed for operation with a 3/8-inch variable speed drill.

• Aluminum Housing:

  SCT-QR tools come with an aluminum body.

• Attached Jacket Stripping Tool:

  Because the jacket on QR cable must be stripped after the coring operation, each SCT-QR stripping/coring tool (labeled SCT-QR-A) comes with a special jacket stripping tool (labeled SCT-QR-B). The two pieces are threaded, so they can be assembled and stored as one unit, which protects the insides of the parts from damage. The jacket stripper is designed with a patented mandrel pin that supports the soft aluminum outer conductor and keeps it from being damaged during the jacket stripping operation.

WARRANTY:

All Cable Prep brand tools are warranted to be free from defects in workmanship and material. Metal SCT-QR bodies have a limited lifetime warranty. SCT-QR stripping/coring blades have a one-year warranty.