US Conec 9393 IBC Brand 1.25mm Cleaning Tool - LC, MU Connectors
The US Conec IBC brand 9393 one-click cleaner is specifically designed to clean LC/UPC, LC/APC and MU optical-fiber ferrule connections in an adapter, faceplate or bulkhead. It features dry cloth technology. The dust cap acts as an adapter for cleaning unmated connectors. The guide cap allows cleaning of connector end faces. Designed for simplex connections, this device is simple to use and highly effective at removing oil and dust contaminants that can impact optical performance negatively. Extension feature increases the cleaner's depth to 208 mm for hard to reach connectors. Each unit provides over 525 cleanings.
Features
- Anti-static system produces pristine endface and minimizes contaminant attraction
- Cleans cable assembly in hand as wll as cables behind panel
- Non-Fraying cloth design
- Simple push to clean action
Applications
- Cable assembly factories
- Field Installations: Cleaning cable assemblies
- Field Installations: Cleaning in-situ/behind the panel connectors
- Standards Compliance IEC-61300-3-35; IEC-TSB-XYZ
US Conec 9393 IBC™ Brand 1.25mm Cleaning Tool — LC and MU Connectors
Laboratory-Tested Fiber Optic End Face Cleaning for LC, MU, LC/UPC and LC/APC ConnectorsThe US Conec 9393 IBC™ Brand Cleaner is engineered to address the full range of contamination that fiber optic technicians encounter in real deployment environments — not just controlled lab conditions. Unlike general-purpose port cleaners, the 9393 has been specifically tested and proven effective against the most common and difficult field contaminants, from pre- and post-mate graphite deposited during repeated connector cycling to airborne particulates like Arizona road dust and dryer lint. For technicians working in outdoor FTTX environments, cable assembly production, data centers, or telecom infrastructure, this level of verified cleaning performance directly translates to fewer failed inspection tests, fewer re-cleans, and faster job completion.
Key Benefits at a Glance:
- Proven effective against 9 real-world contaminants including graphite, skin oil, IPA residue and road dust
- 180° rotating cleaning system delivers a full sweep of the entire end face
- Crush resistant to 45 lbs and impact resistant to 6-foot drops for demanding field use
- Audible click confirms proper connector engagement on every clean
- Extendable tip reaches up to 208mm for deeply recessed connectors
- Disposable design prevents cross-contamination between cleaning engagements
Why Choose the US Conec 9393 IBC™ Brand Cleaner?
Tested. Verified. Field-Ready.
Most cleaning tools are rated by cleans per unit and connector compatibility — the 9393 goes further with documented contamination removal testing against the substances technicians actually encounter. That verification matters when a failed end face inspection means a truck roll or a production hold.- 180° rotating cleaning system ensures the full circumference of the end face is cleaned in a single engagement
- Audible click confirms the connector is properly seated before the clean cycle initiates — eliminating guesswork on recessed or hard-to-see ports
- Extendable tip increases reach to 208mm for connectors that standard cleaners cannot access
- Anti-static resin construction dissipates charge buildup during cleaning, reducing post-clean particle attraction to the end face
- Non-fraying cloth design ensures the cleaning media never sheds fibers onto the surface being cleaned
- Dust cap doubles as an adapter for cleaning unmated connectors — no separate adapter required
Proven Against Real-World Contamination
The 9393 has been laboratory tested and verified effective at removing the following contaminants from fiber optic end faces:- Arizona road dust and dryer lint
- Skin oil and hand lotion
- Pre- and post-mate graphite
- 70% IPA residue and distilled water residue
- NaCl (salt) residue
- Vegetable oil
Built for the Field and the Factory
The 9393 is designed to survive the physical demands of daily field use without compromising cleaning performance. The durable housing withstands crush loads up to 45 pounds and drop impacts up to 6 feet — making it suitable for tool bags, belt pouches, and high-traffic production floor environments.- Fiber network panels, faceplates and bulkheads
- Outdoor FTTX installations and OSP enclosures
- Cable assembly production and quality control
- Testing laboratories and inspection stations
- Data centers, servers, switches, routers and OADMs with LC and SC interface
Standards Compliance
The US Conec 9393 is designed to support cleaning practices compliant with the following fiber optic cleanliness standards:- IEC-61300-3-35 — International standard for the inspection of fiber optic connector end faces
- IEC-TSB-XYZ — IEC technical specification for fiber optic connector cleaning procedures
Specifications
| Part Number | 9393 |
| SPC Stock Number | 846X905 |
| Brand | IBC™ by US Conec |
| Style | Push Style Port Cleaner |
| Connector Type | LC, MU |
| Ferrule Size | 1.25mm |
| Cleaning Function | In-Situ or Unmated Cable Assembly |
| Cleaning Technology | Dry cloth, 180° rotating system |
| Extended Reach | 208mm |
| Use Type | Disposable |
| Number of Cleans | 525+ |
| Crush Resistance | 45 lbs |
| Impact Resistance | 6 ft drop |
| Standards | IEC-61300-3-35, IEC-TSB-XYZ |
- 6 or More: $49.34
