US Conec 9392 IBC Brand Cleaner SC — 2.5mm Fiber Connector Cleaner SC FC ST D4 E2000
The US Conec 9392 IBC™ Brand Cleaner SC is a push-style disposable fiber optic connector cleaner engineered for 2.5mm ferrule connectors — specifically SC/UPC, SC/APC, FC, ST, D4 and E2000. Designed for the outside plant, legacy telecom, and premises cabling environments where these connector types are most prevalent, the 9392 delivers consistent, contamination-free end face cleaning across all five connector families in a single disposable tool.
A single push engages the connector, initiates the 180° rotating dry cloth cleaning sweep, and advances the tape automatically — confirmed by an audible click. The extendable tip reaches up to 208mm for recessed connectors behind dense panels. Anti-static resin construction minimizes post-clean particle attraction. Non-fraying cloth eliminates media contamination. Each unit delivers 525+ cleans. Compliant with IEC-61300-3-35.
US Conec 9392 IBC™ Brand Cleaner SC — 2.5mm Fiber Optic Connector Cleaner
Laboratory-Tested Fiber Optic End Face Cleaning for SC, FC, ST, D4 and E2000 ConnectorsThe US Conec 9392 IBC™ Brand Cleaner SC is engineered for the 2.5mm ferrule connector families most commonly encountered in outside plant, premises cabling, and legacy telecom infrastructure. SC, FC, ST, D4 and E2000 connectors appear across a wide range of deployment environments — from OSP splice enclosures and legacy telco central offices to enterprise patch panels and test equipment interfaces — and the 9392 addresses all five connector types in a single disposable tool. For organizations managing mixed 2.5mm connector populations across multiple sites or applications, one cleaning tool, one process, and one training requirement covers the entire installed base.
Key Benefits at a Glance:
- Covers SC/UPC, SC/APC, FC, ST, D4 and E2000 connector types in a single disposable cleaner
- 180° rotating cleaning system delivers a full sweep of the entire 2.5mm end face
- Proven effective against 9 real-world contaminants including graphite, skin oil, IPA residue and road dust
- Extendable tip reaches up to 208mm for deeply recessed connectors
- Crush resistant to 45 lbs and impact resistant to 6-foot drops for demanding field use
- Audible click confirms proper connector engagement on every clean
- Disposable design prevents cross-contamination between cleaning engagements
Why Choose the US Conec 9392 IBC™ Brand Cleaner SC?
One Tool. Five Connector Types. Field-Verified.
SC, FC, ST, D4 and E2000 connectors share the 2.5mm ferrule form factor but appear across a wide range of deployment environments. The 9392 addresses all five in a single disposable tool, eliminating the need for connector-specific cleaners in mixed-connector environments.- Push-style port cleaner designed for 2.5mm ferrules — compatible with SC/UPC, SC/APC, FC, ST, D4 and E2000 connector types
- 180° rotating cleaning system ensures the full circumference of the 2.5mm end face is cleaned in a single engagement
- Audible click confirms the connector is properly seated before the clean cycle initiates — eliminating guesswork on recessed or hard-to-see ports
- Extendable tip increases reach to 208mm for connectors that standard cleaners cannot access
- Anti-static resin construction dissipates charge buildup during cleaning, reducing post-clean particle attraction to the end face
- Non-fraying cloth design ensures the cleaning media never sheds fibers onto the surface being cleaned
- Dust cap doubles as an adapter for cleaning unmated connectors — no separate adapter required
Proven Against Real-World Contamination
The US Conec 9392 IBC™ Brand Cleaner SC has been laboratory tested and verified effective at removing the following contaminants from fiber optic end faces:- Arizona road dust and dryer lint
- Skin oil and hand lotion
- Pre- and post-mate graphite
- 70% IPA residue and distilled water residue
- NaCl (salt) residue
- Vegetable oil
Built for the Field and the Factory
The 9392 is designed to survive the physical demands of daily field use. The durable housing withstands crush loads up to 45 pounds and drop impacts up to 6 feet — suitable for tool bags, belt pouches, and high-traffic production floor environments.- Fiber network panels, faceplates and bulkheads with SC, FC or ST interfaces
- Outside plant enclosures and splice closures with SC or FC connectors
- Legacy telecom infrastructure with FC, ST, D4 or E2000 connector populations
- Cable assembly production and quality control
- Testing laboratories and inspection stations
- Data centers and enterprise networks with SC interface equipment
Standards Compliance
The US Conec 9392 is designed to support cleaning practices compliant with the following fiber optic cleanliness standards:- IEC-61300-3-35 — International standard for the inspection of fiber optic connector end faces
- IEC-TSB-XYZ — IEC technical specification for fiber optic connector cleaning procedures
Specifications
| Part Number | 9392 |
| SPC Stock Number | 846X900 |
| Brand | IBC™ by US Conec |
| Style | Push Style Port Cleaner |
| Connector Type | SC/UPC, SC/APC, FC, ST, D4, E2000 |
| Ferrule Size | 2.5mm |
| Cleaning Function | In-Situ or Unmated Cable Assembly |
| Cleaning Technology | Dry cloth, 180° rotating system |
| Extended Reach | 208mm |
| Use Type | Disposable |
| Number of Cleans | 525+ |
| Crush Resistance | 45 lbs |
| Impact Resistance | 6 ft drop |
| Standards | IEC-61300-3-35, IEC-TSB-XYZ |
- 6 or More: $49.34
